vroapp
08-07 08:05 AM
I'm afraid I can't help you with your application but Congrats! on getting married, i.e... :-)
wallpaper selena+gomez+album+artwork
mbawa2574
06-11 05:43 PM
Why Indians bash Bush ? He has always respected our community and helped us through. He has even fought with his fellow conservatives like Tancredo on this issue,Stop supporting the democrats and strart thinking like Indians. Make sure you understand that Democratic party does not give a damn on Iraq was attacked and people are getting killed. They need their own vote bank from dumb public in this country. Don;t get used in hands of democrats. They have used us from last thirty years. If someone thinks that Bush is an idiot, he is a super idiot. Bush is a straight forward guy and 90% Americans hate him because he speaks truth. Now you have to decide that Bush is good for immigrants or those scum bag democrats.
dehradoon
07-17 05:59 PM
Am I in the same situation? My spouse left US today to INDIA. However we filled the 485 on July 2nd. Will they consider that as abandonment of the application?
You will need to have your spouse back for biometrics, if not then reschedule it early as no show = abondonment of application
You will need to have your spouse back for biometrics, if not then reschedule it early as no show = abondonment of application
2011 who says Selenagomez myjul
md_alien
06-22 11:55 AM
Skin test is mandatory unless you provide proof to the USCIS civil surgeon that you have done skin test in the past and the results were "POSITIVE"
As per my doc, if one has a "POSITIVE" skin reaction to PPD test, they should never take the skin test again as there is a danger of severe inflammation.
Another point to note is that if the reaction to PPD is over 10mm (even if X-Ray is negative) USCIS might want documentation to prove that you have been evaluated by the State's Public Health Dept and undergoing treatment. This is my personal experience as I had 16mm reaction to PPD. I have a copy of the RFE and can upload a scan if it benefits the community in general.
In US, a positive skin test result is interpreted as the person having had exposure to Tuberculin bacteria in the past which are lying dorman in his/her lungs. They will want to start a 4 mnth antibiotic treatment to eliminate the dormant bacteria. I'm currently on the course, 2 pills a day, although I had negative X-Ray. :mad: :mad: :mad:
As per my doc, if one has a "POSITIVE" skin reaction to PPD test, they should never take the skin test again as there is a danger of severe inflammation.
Another point to note is that if the reaction to PPD is over 10mm (even if X-Ray is negative) USCIS might want documentation to prove that you have been evaluated by the State's Public Health Dept and undergoing treatment. This is my personal experience as I had 16mm reaction to PPD. I have a copy of the RFE and can upload a scan if it benefits the community in general.
In US, a positive skin test result is interpreted as the person having had exposure to Tuberculin bacteria in the past which are lying dorman in his/her lungs. They will want to start a 4 mnth antibiotic treatment to eliminate the dormant bacteria. I'm currently on the course, 2 pills a day, although I had negative X-Ray. :mad: :mad: :mad:
more...
perm2gc
08-24 04:56 PM
The situation seems pretty grim...there are about 80 k indian students
coming to the US every year in total about 250-350 k including all international students (I assume) and at least 50% of them want to work after graduation (I assume)..with the h1 cap at 65K(lot of them taken away by consultants) ...and the lots of school funding squeezed because of the war..Most students (I assume) study with no AID hoping to get a job to repay some of the loan/ father's money...
I think prospective students need to know the real situation out here..before
they make a choice of studying here.
I hope this grim situation is temporary... It seems you want awake everyone about coming to USA for Studies..Good View but dont try to blame on others for what is happening.. We are in line in a BROKEN System..
coming to the US every year in total about 250-350 k including all international students (I assume) and at least 50% of them want to work after graduation (I assume)..with the h1 cap at 65K(lot of them taken away by consultants) ...and the lots of school funding squeezed because of the war..Most students (I assume) study with no AID hoping to get a job to repay some of the loan/ father's money...
I think prospective students need to know the real situation out here..before
they make a choice of studying here.
I hope this grim situation is temporary... It seems you want awake everyone about coming to USA for Studies..Good View but dont try to blame on others for what is happening.. We are in line in a BROKEN System..
rsdang
10-30 04:05 PM
Dude you have the AP use it... I have travelled on AP multiple time no issues. I have an approved H1 which I dont use any more...
All the best
All the best
more...
joydiptac
09-30 05:37 PM
I liked the tone and tenor of aila...
Before you get all mushy about AILA and start bashing USCIS take deep look and see if AILA is really acting as a friend or a adversary in friends disguise?
Before you get all mushy about AILA and start bashing USCIS take deep look and see if AILA is really acting as a friend or a adversary in friends disguise?
2010 selena gomez who says album
ca_immigrant
07-25 07:49 PM
Folks,
What is the best and most cost effective way to send some money home ?
Till last year I was using the service from icici and was under the belief that the exchange rate was pretty decent. the service I believe was never free as they make up for service fee though the exchange rate.
Today for example when I check on icici it says they will give a rate of 47.63 per $ which I believe means around half a rupee less per $ ?
so for $1000 they are essentially charging Rs 500 (aound $10)
I beleive previously they were giving around 25 paise less per $ and now it looks like it is 50 paise less per dollor ?
Western union charges $15 and also gives a lower exchange rate than icici.
So would that mean ICICI isthe best cost effective one ?
Ideas ?
Thanks,
What is the best and most cost effective way to send some money home ?
Till last year I was using the service from icici and was under the belief that the exchange rate was pretty decent. the service I believe was never free as they make up for service fee though the exchange rate.
Today for example when I check on icici it says they will give a rate of 47.63 per $ which I believe means around half a rupee less per $ ?
so for $1000 they are essentially charging Rs 500 (aound $10)
I beleive previously they were giving around 25 paise less per $ and now it looks like it is 50 paise less per dollor ?
Western union charges $15 and also gives a lower exchange rate than icici.
So would that mean ICICI isthe best cost effective one ?
Ideas ?
Thanks,
more...
ARUNRAMANATHAN
06-11 02:23 PM
bump
hair hair selena gomez who says
daishwarya
07-20 03:03 PM
@Sanjay, sent you a private message. Please check.
more...
Ramba
08-26 04:29 PM
I am also in the same boat. I have my Masters in Mechanical Engineering. I had filed for H1B with companies A & B as Mechanical Engineer and have worked with them for 1.5 years each.
Recently I had switched to desi company (C) and had to file my H1B as Software Engineer. I got my H1B without issues. I am crossing my fingers and planning to apply for Labor Certification as Software Engineer in EB2. (MS -Mech Engg + 1 year experience).
Other members pls share your experience if your case is simillar. I know lot of people who did their masters in other fields and changed to Software when they were in OPT. But do not know some one who has worked in H1b as Mechanical engineer and then got another H1 as software engineer. Has anyone with my simillar background, gone past the I140 stage?
Thanks.
It is all depend on how your employer specifies the education requirement for the position in LC. If that position requires engineering in any branch, then you will be fine. Otherwise, if the position requires education in particular branch and if you do not have that branch of study, then it may be a problem in LC or 140.
Recently I had switched to desi company (C) and had to file my H1B as Software Engineer. I got my H1B without issues. I am crossing my fingers and planning to apply for Labor Certification as Software Engineer in EB2. (MS -Mech Engg + 1 year experience).
Other members pls share your experience if your case is simillar. I know lot of people who did their masters in other fields and changed to Software when they were in OPT. But do not know some one who has worked in H1b as Mechanical engineer and then got another H1 as software engineer. Has anyone with my simillar background, gone past the I140 stage?
Thanks.
It is all depend on how your employer specifies the education requirement for the position in LC. If that position requires engineering in any branch, then you will be fine. Otherwise, if the position requires education in particular branch and if you do not have that branch of study, then it may be a problem in LC or 140.
hot mtv news her latest publicado tells Who+says+selena+gomez+album+artwork
phillyag
05-30 04:43 PM
2. I140 receipt
3. I485 receipt
Would photocopies do for the above 2 docs ?
3. I485 receipt
Would photocopies do for the above 2 docs ?
more...
house +selena+gomez+album+art
americandesi
06-17 12:05 AM
I am planning to apply for both Canadian Permanent Residency and US green card next month. Assuming that I get my Canadian Permanent Residency and US Greencard after two years, what options do I have to maintain the permanent resident status in both countries, so that I am eligible to apply for citizenship in both countries.
Some say that showing proof of residence in both countries, commuting between the countries for work (Windsor-Canada and Detroit-US) and paying taxes in both countries would suffice.
Please guide me on this.
Some say that showing proof of residence in both countries, commuting between the countries for work (Windsor-Canada and Detroit-US) and paying taxes in both countries would suffice.
Please guide me on this.
tattoo selena gomez who says album
reddymjm
12-04 04:52 PM
I am also flying to Chennai in 2 days.
more...
pictures +says+selena+gomez+album+
belmontboy
10-13 11:00 PM
If you are ugly, you could go in formal shirts & pants.
If you are smart and sexy, you could go naked! :D
If you are smart and sexy, you could go naked! :D
dresses selena gomez who says video
tonyHK12
12-01 10:01 AM
Definitely a good idea.........the first thing that needs to happen is for us immigrants to contact our own employers (and if it is a big company - they will have some section that deals with govt affairs/lobbying) ask them to support our cause through action.......
I work for a small company, but my employer is a very decent man and may provide some funds..........(Christmas season and all!).
If he chooses to donate would it be the "contribute" link?
Great! thanks for your efforts. Yes it would be good if he creates an account and logs in before donating, that way it would be credited as his contribution.
The link is in my signature but you can also follow the link 'Donate' at the top in green or 'Contributions' on the home page.
Of course other large companies like the ones in Silicon Valley, MS, etc could also directly reach out to our admin/core besides this and also help in lobbying.
I work for a small company, but my employer is a very decent man and may provide some funds..........(Christmas season and all!).
If he chooses to donate would it be the "contribute" link?
Great! thanks for your efforts. Yes it would be good if he creates an account and logs in before donating, that way it would be credited as his contribution.
The link is in my signature but you can also follow the link 'Donate' at the top in green or 'Contributions' on the home page.
Of course other large companies like the ones in Silicon Valley, MS, etc could also directly reach out to our admin/core besides this and also help in lobbying.
more...
makeup looks gorgeous selenablues who solo Who+says+selena+gomez+album+artwork
gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
girlfriend selena+gomez+album+artwork
Redeye
12-12 05:05 PM
I have EB3 PD of 2004 and it will take a while to get GC for sure. I am in a situation where I do not want to go for stamping and want to use AP in Feb 2008. If I do use AP will it invalidate my H1 with the same employer. My H1 6th year ends in 2010. If I get married in India at a later date will it be an issue to bring my spouse on H4 since I am a parolee?
Is there a way around this with a H1 extention at a later date and stamping at a later date?
Thanks
Is there a way around this with a H1 extention at a later date and stamping at a later date?
Thanks
hairstyles +selena+gomez+album+art
pbojja
05-22 11:22 AM
I totally agree, but as if there isnt a backlog at I-140 right now!! its been more than an year since I filed my I-140 ..I see a couple of LUDs but no approval in sight!
Does anyone else have the same story? I-140 pending for 12+ months now(transfered from NSC to TSC last month).
I applied my 140 on July 05 07 and still waiting , transfered to TSC last month . I guess the transfer cases box is the last one , so I guess our approvals are not insight , I beleive CIS is working on 485 cases who are current ..thats why I m all in for this rule
Does anyone else have the same story? I-140 pending for 12+ months now(transfered from NSC to TSC last month).
I applied my 140 on July 05 07 and still waiting , transfered to TSC last month . I guess the transfer cases box is the last one , so I guess our approvals are not insight , I beleive CIS is working on 485 cases who are current ..thats why I m all in for this rule
frostrated
03-16 03:06 PM
please see below.
Background:
My wife and I are currently working on EADs obtained through my previous employer filing for my green card (eb3 India, pri date: dec 2005), my wife is a dependant on this greencard petition. We last re-entered US using our AP. Two years ago, more than six months after my I-140 got approved, I changed my employer (to a similar position in the IT field itself) and my new (and current) employer filed for AC-21. They have also obtained a I-797 for me as a backup which I have used. Also prior to getting my EAD, my wife worked on an H1 visa for a year and then we got EAD, she has been working on that ever since. Our EAD was recently submitted for renewal and will be valid for the next two years.
I got accepted into a fulltime MBA program in the US, which I am planning to attend. This would mean that I quit my current job and after the two years in MBA I will be joining a different employer in a different field (ie: I will be moving out of IT into something like finance). I am assuming transition to F1 is out of question since I have shown immigration intent
Questions:
1) Will it be legal for me to go fulltime to school on an AOS pending status? Yes you can go to school while in AOS. But you cant go to school full time when in AOS if you are the primary applicant. You need to be still employed full time in your line of work.
2) Will I have trouble, re-entering the US on an AP if I travel overseas during the time I am enrolled in school? Yes. Your AP is no longer valid, as you are no more working for the sponsor of your permanent residency.
3) Can I use this EAD card to go for an internship between my first and second year (the job will not be IT)? Only if you are a dependent of the primary applicant.
4) Can I use this EAD card to work fulltime after MBA graduation, provided it is still valid for a few more months (the job will not be IT)? Only if you are a dependent of the primary applicant.
5) If my post-MBA employer files for a greencard for me in the new position which is different from IT, will I be able to use my old priority date of Dec 2005? Yes you can. You will need to file a new labor, and request that they use the old priority date. You can also file in EB2 and request they use the EB3 filing date of Dec 2005.
6) To mitigate risk, my wife is planning to go into H1 so that I can get an H4 if going to school on EAD doesn't work. Is this strategy to use H1 during school time (and travel overseas and re-enter using H4) and use EAD while internship safe? Using H1 on your wife, and you being on H4 is safe. But you cannot use the EAD anymore. Your EAD is tied to your employment, unless you are the dependent on the primary applicant for AOS.
7) If my wife cannot find a H1 job, can she work on her EAD while I am also using EAD to go to school. No. When you quit working and go to school, both of you are in illegal status. To remain in status, she either needs to convert to H1 or you need to convert to F1 and have her here as F2. Best bet, is for her to convert to H1 and you to either H4 or F1.
8) I am assuming that for any EAD based status to work, I need to have a future job offer in the same category. My current employer will not do that.I can get a future job offer from a small IT consulting firm in the same IT field for which my greencard application was filed for. Will that be good enough to keep my EAD alive while in school? No. For your EAD to be valid, you still need to be working. Stopping work does not enable you to continue to be in EAD status.
Thanks SO much for answering. I have this wonderful opportunity in front of me and I really hope immigration will not be a road block to achieve my dreams.
Background:
My wife and I are currently working on EADs obtained through my previous employer filing for my green card (eb3 India, pri date: dec 2005), my wife is a dependant on this greencard petition. We last re-entered US using our AP. Two years ago, more than six months after my I-140 got approved, I changed my employer (to a similar position in the IT field itself) and my new (and current) employer filed for AC-21. They have also obtained a I-797 for me as a backup which I have used. Also prior to getting my EAD, my wife worked on an H1 visa for a year and then we got EAD, she has been working on that ever since. Our EAD was recently submitted for renewal and will be valid for the next two years.
I got accepted into a fulltime MBA program in the US, which I am planning to attend. This would mean that I quit my current job and after the two years in MBA I will be joining a different employer in a different field (ie: I will be moving out of IT into something like finance). I am assuming transition to F1 is out of question since I have shown immigration intent
Questions:
1) Will it be legal for me to go fulltime to school on an AOS pending status? Yes you can go to school while in AOS. But you cant go to school full time when in AOS if you are the primary applicant. You need to be still employed full time in your line of work.
2) Will I have trouble, re-entering the US on an AP if I travel overseas during the time I am enrolled in school? Yes. Your AP is no longer valid, as you are no more working for the sponsor of your permanent residency.
3) Can I use this EAD card to go for an internship between my first and second year (the job will not be IT)? Only if you are a dependent of the primary applicant.
4) Can I use this EAD card to work fulltime after MBA graduation, provided it is still valid for a few more months (the job will not be IT)? Only if you are a dependent of the primary applicant.
5) If my post-MBA employer files for a greencard for me in the new position which is different from IT, will I be able to use my old priority date of Dec 2005? Yes you can. You will need to file a new labor, and request that they use the old priority date. You can also file in EB2 and request they use the EB3 filing date of Dec 2005.
6) To mitigate risk, my wife is planning to go into H1 so that I can get an H4 if going to school on EAD doesn't work. Is this strategy to use H1 during school time (and travel overseas and re-enter using H4) and use EAD while internship safe? Using H1 on your wife, and you being on H4 is safe. But you cannot use the EAD anymore. Your EAD is tied to your employment, unless you are the dependent on the primary applicant for AOS.
7) If my wife cannot find a H1 job, can she work on her EAD while I am also using EAD to go to school. No. When you quit working and go to school, both of you are in illegal status. To remain in status, she either needs to convert to H1 or you need to convert to F1 and have her here as F2. Best bet, is for her to convert to H1 and you to either H4 or F1.
8) I am assuming that for any EAD based status to work, I need to have a future job offer in the same category. My current employer will not do that.I can get a future job offer from a small IT consulting firm in the same IT field for which my greencard application was filed for. Will that be good enough to keep my EAD alive while in school? No. For your EAD to be valid, you still need to be working. Stopping work does not enable you to continue to be in EAD status.
Thanks SO much for answering. I have this wonderful opportunity in front of me and I really hope immigration will not be a road block to achieve my dreams.
clifford
02-03 05:43 PM
Probably 1929 depression and current times are not similar. So BTW were those 400K maxicans holding any type of Visa ? Currently as far I know all the 65K H1b Patitions were approved, I do not know for what reason ? If situation was that bad may be only 10,000 k could have been approved and limit could be dropped to 15k for say a period of next 5 years. I am pretty sure that is not going to happen. The Anti H1 wave was probably started by Nobel Laureate Obama when he pointed to Bangalore and then Lou Dobbs and then Senator Grassley and so on. Now if you look at job boards it is clearly mentioned by many job postings "Please no H1Bs".
Lets not forget that H1B had been misused by many desi firms as well.
Lets not forget that H1B had been misused by many desi firms as well.
No comments:
Post a Comment